A Modular Reference System

One System.
Endless Possibilities.

Two components, one reference. The VERDADE III and the VERDADE III-S are so closely matched that every configuration delivers the same performance, from the monitor pair to the fully expanded setup.

Compact Reference

2 × VERDADE III

The complete reference. Neutrality without additional components.

From 35 Hz
1 × stereo amplifier
Mixing, nearfield

Three-Way Reference

2 × VERDADE III + 2 × III-S

One subwoofer per channel. Extended low end, greater dynamic headroom.

From 25 Hz
2 × stereo amplifier
Larger control rooms

Full-Range Reference

2 × VERDADE III + 4 × III-S

Two subwoofers per channel. Not deeper, but more composed.

From 25 Hz
3 × stereo amplifier
Mastering

Every configuration is based on the same drivers, the same crossover and the same voicing. You extend your system without losing your reference.

One platform.
Multiple configurations.
Always the same uncompromising reference.

What you will also need

All VERDADE III series loudspeakers, monitors and subwoofers alike, are passive. You decide which power amplifiers and which bass management you use to run your system. Bass management ahead of the power amplifiers is required. Crossover frequency 63 to 100 Hz. Amplifiers: Compact one stereo amp, Three-Way two, Full-Range three.

Fully analogue with SPL Performer series amplifiers and an analogue crossover, or digital with Purifi and DSP.
We or our retail partners will be glad to advise you.

Amplifiers	One stereo amplifier per pair of loudspeakers. Compact one, Three-Way two, Full-Range three.
Power per channel	VERDADE III at least 2 × 230 W into 8 Ω VERDADE III-S 2 × 300 W into 8 Ω
Bass management	Required as soon as a III-S is in use. The crossover is placed before the amplifiers.
Crossover frequency	63 to 100 Hz, depending on room and placement
Equipment recommendation	Deliberately open. You work with the components you trust.